Part Number Hot Search : 
00BGXC DS1904 MA4P74 ISL88706 S29GL01G ON1002 2SC197 74LVX373
Product Description
Full Text Search
 

To Download UTXQ512 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Aeroflex UTMC Application Note UTXQ512-AN-000 _______________________________________________
CONVERTING AEROFLEX UTMC UT9Q512 4M SRAM into an SEU IMMUNE 1M X 1 SRAM
This application note describes how to use two UT9Q512 4M SRAMs and one UT54ACS151 logic device to mimic a 1Mx1 SRAM. As shown below, the single bit is written into three locations of the same. When the data is read out, it is used in a voting system to select either a 0 or a 1 output. This voting method virtually makes it immune to SEU hits. Since the bits of a word are not physically adjacent on the die, it is nearly impossible for one particle to cause two bits to flip in the same word. As such, it would require multiple particle hits to cause an upset. The system timing results in maximum read cycle of 48ns, (25ns SRAM read + 23ns input to Y). For better system performance Aeroflex UTMC can screen for memories with read cycles access times down to 17 ns. The timing analysis above assumes capacitive output loads of 50 pF or less. If the system loading is greater than 50 pF, the user should consult the "Operational Frequency vs. Load Capacitance" application note to calculate the true performance of the design. This application note can be downloaded from: http://www.utmc.com/products/msi_switch.pdf. If a tri-statable output is required, then additional logic would be required. Aeroflex UTMC has the following logic devices with tristate controlled outputs: UT54ACS244, UT54ACS245, UT54ACS365, UT54ACS373, UT54ACS374, and UT54ACS541. Each of these devices has a non-inverting tri-statable output. If the 4M SRAMs are packaged in our shielded package, they can withstand a total dose of 100K rads(Si) in most orbits. The logic devices can be purchased with a total dose hardness ranging from 100K rads(Si) to 1 Mrad. This design example requires more board real estate and a new board layout, along with the additional timing analysis, mentioned above, to replace the obsoleted BAE Systems 1M x 1 SRAM parts. The parts shown would use approximately 1.75 square inches of board space.
Creation Date: 6/21/02
Page 1
Modification Date:
Aeroflex UTMC Application Note UTXQ512-AN-000 _______________________________________________
/EN_MEM_L /W A(18:0) /G /EN_MEM_H
512K x 8
D0 D1 D2 D0
512K x 8
D1 D2 Modification Date:
D(3:7)
Written bit
D0 D1 D2
A B C
D7 D6 D5 D4 D3 D2 D1 D0
UT54ACS151
/G Y
INPUTS SELECT C(D2) B(D1) A(D0)
X L L L L H H H H X L L H H L L H H X L H L H L H L H
/Y
OUTPUT STROBE /G
H L L L L L L L L
Y
L D1 = 0 D1 = 0 D2 = 0 D3 = 1 D4 = 0 D5 = 1 D6 = 1 D7 = 1
Read bit out to system
Truth Table
Creation Date: 6/21/02 Page 2
Aeroflex UTMC Application Note UTXQ512-AN-000 _______________________________________________
Creation Date: 6/21/02
Page 3
Modification Date:


▲Up To Search▲   

 
Price & Availability of UTXQ512

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X